Reinhard Schmidt - Blogabond

Reinhard Schmidt Termination
Only flat line real-time signals, or message stating "AMPLIFIER FAILURE", or message stating "NO VALID SIGNALS ARE PRESENT"

The amplifier must be turned on.

Check for communication between the amplifier and main computer using the Communication Test from the Help button menu in Windows or from the main menu in DOS to see if the amplifier is functioning.

The wrong amplifier communication driver is installed. Was the system just upgraded or a backup restored? See the User's Manual, chapter 11, for more details on configuring the main computer to match the amplifier.

The ethernet cable (BNC) must be attached between the ethernet card of the amplifier and the main computer. Check that the BNC cable running from the amplifier to the computer must be terminated by 50 Ohm terminators at each end. Most cards are terminated internally and would have a sticker stating this. If there is no termination sticker, each 10-BASE T board must have a BNC 'T' adapter and a 50 Ohm terminator attached.

Turn the amplifier off and then on. The amplifier beeps as it boots up in progressively higher tones spaced seconds apart. If it is beeping and the boards are seated then this amplifier is probably OK. See Users Manual, chapter 11 for more details about the exact sequence of beeps.

The Amplifier card(s) may be dislodged. Please take the cover off and make sure all boards are seated correctly.

Turn the system off and then on.

Reinhard Schmidt Ep Medsystems - Ep Medsystems Termination
EPMedSystems cautions investors and others to review the cautionary statements set forth in this press release and in EPMedSystems' reports filed with the Securities and Exchange Commission and cautions that other factors may prove to be important in affecting the EP MedSystems' business and results of operations. Readers are cautioned not to place undue reliance on this press release and other forward-looking statements, which speak only as of the date of this release. EPMedSystems undertakes no obligation to publicly release the results of any revisions to these forward-looking statements that may be made to reflect events or circumstances after the date of this report or to reflect the occurrence of unanticipated events.

Reinhard Schmidt Ep Medsystems - Reinhard Schmidt Ep Medsystems Since the company was founded in 1993, our products have been placed in hundreds of cath laboratories worldwide. Because we are completely dedicated to the field of cardiology we have no other products to dilute our attention or efforts. We are also publicly-held (NASDAQ: EPMD), so we have the resources to support operations, fund new product development, and promote long-term growth.
Manufacturing Facility ISO 13485Certified

Reinhard Schmidt Termination - Reinhard Schmidt Ep Med Systems - Ep Medsystems Termination

written by

reinhardschmidt on August 25, 2009 from Teaneck, United States

from the travel blog: Reinhard Schmidt Ep Med Systems

tagged ReinhardSchmidtEpMedsystems, ReinhardSchmidtTermination and EpMedsystemsTermination

Send a Compliment

comment on this...